Crow Busters Forum

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Triple Play Mods


Senior Member

Status: Offline
Posts: 323
Date:
Triple Play Mods
Permalink  
 


This one is for you, Marv!

How did I modify my Edge Triple Play?  I made a wired remote similar to the Buster II mod on this website, and I went to a 9 volt battery from the 4 AAs.  It's pretty simple.  Pictures attached.

1.  Get a spool of speaker wire - I used 75 feet, not sure of the gauge.  Just a simple soldering iron to attach to the inside of the AA battery box terminals.  I melted a small slot in the battery cover for the wire to exit the unit, and tied a knot in the wire on the inside of the battery box to keep it from yanking out.  Paint the wire if you wish.

2.  Connect (crimp) a 9 volt battery connector (cheap at Radio Shack) to the end of the speaker wire on the spool, and attach a 9 volt battery to the spool - I just taped the battery on so I can replace it easily.  Instead of a switch, I just connect one terminal to the battery and use the connector as an on/off switch.  I also melted the Triple Play on/off switch in a permanent "on" position with the soldering iron, but it's not necessary.  Just make sure you connect it with the correct polarity -- the Triple Play rotates clockwise.

Jerry

 

 



Attachments
__________________
Crows are still winning.
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.