Crow Busters Forum

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Polychoke


Senior Member

Status: Offline
Posts: 259
Date:
Polychoke
Permalink  
 


Ordered a Polychoke II ,installed it today will test it tomorrow. I'll post results, has anyone else tried one of these?

__________________

whatever i'm doing i'm thinking about crow hunting

SPGC http://crowhunting.activeboard.com/



Guru

Status: Offline
Posts: 1374
Date:
Permalink  
 

I have an old 12 Gauge M12 with a 26 inch barrel and a Poly Choke. Never much cared for the beer can on the end of the barrel thig but being able to change choke constrictions fom Xfull to cyl. at the twist of the wrist is great. They reduce recoil a bit but have a good muzzle blast to bystanders. Poly Choke is steel shot compatable as well.

Ted

__________________

Life's tough... It's even tougher if you're stupid. John Wayne



Senior Member

Status: Offline
Posts: 259
Date:
Permalink  
 

Thanx M12, it isn't pretty onthe end of the gun but I'm hoping being able to change constriction without changing tubes will overcome the unsightly appearancebleh.gif



__________________

whatever i'm doing i'm thinking about crow hunting

SPGC http://crowhunting.activeboard.com/



Guru

Status: Offline
Posts: 927
Date:
Permalink  
 

Hell,I thought they went out with the leisure suit and mood rings!!biggrin

__________________

WELCOME TO THE MACHINE


 Four in Bengazi died, Obama and Hillary lied,We must never forget!!!!!!!!!!



Senior Member

Status: Offline
Posts: 387
Date:
Permalink  
 

I have a Stevens Model 58 bolt action 12 Ga. It has a 2 shot clip. On the muzzle is a Savage Adjustable Choke. Full to Cylinder. The first thing I ever shot with a shotgun was a rabbit with this gun. I could'nt tell you what the choke was set on.

Who's up for some bolt action crow hunting.
Gunna need a lot of clips.

Mike

__________________


Senior Member

Status: Offline
Posts: 259
Date:
Permalink  
 

Finally got time to test pattern polychoke, it works great! Now I can change constriction with no wrenchbiggrin. Patterns are equal to my choke tubes and it goes from extra-full to spreader which is slightly more than cylinder.

__________________

whatever i'm doing i'm thinking about crow hunting

SPGC http://crowhunting.activeboard.com/



Senior Member

Status: Offline
Posts: 150
Date:
Permalink  
 

I have had a P2 on my mossberg 835 for years...I love mine...so quick and versatile if your hunting multispecies in one day...I start a crow stand off with cottontail squeals with full choke n buck shot...switch right over to 7 1/2 shot and modified...works great...I am getting one for my M2000 also !

__________________
http://wildinthewoods.proboards.com/index.cgi?


Senior Member

Status: Offline
Posts: 150
Date:
Permalink  
 

I really like it for crows...if they r coming in close I open er up...if its windy or they are spooky and stayin higher I choke it down, and it only takes seconds.

__________________
http://wildinthewoods.proboards.com/index.cgi?


Senior Member

Status: Offline
Posts: 150
Date:
Permalink  
 

SHANEDOG wrote:

Hell,I thought they went out with the leisure suit and mood rings!!biggrin



Leisure suits are out ?...no

 



__________________
http://wildinthewoods.proboards.com/index.cgi?


Member

Status: Offline
Posts: 5
Date:
Permalink  
 

I have a PolyII and have done some patterning with factory steel loads.  I can send you a link to results if you'd like.  I have not patterned much lead.  I rarely shoot more than a few boxes of the exact same load at a time so there is not much reason to pattern it, as yet.

__________________


Senior Member

Status: Offline
Posts: 259
Date:
Permalink  
 

I only shoot lead through mine, and I use a Patternmaster for steel loads. From what I've seen so far the patterns are as good as choke tubes, but goes from spreader choke to extra full choke with the twist of a wristthumbsup.gif. So far I like it, I like it alot!

__________________

whatever i'm doing i'm thinking about crow hunting

SPGC http://crowhunting.activeboard.com/

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.